Wifiway, Livecd based on LFS

[berni69]

Download Links
http://download.wifislax.com:8080/wifiway-1-final.iso
http://download.wifislax.com:8080/wifiway-1-final.iso.md5


Kernel
Wifiway has been adapdet to start in 'LiveUSB' and optimitzed with the tecnology SMP.
This tecnology improves the system speed if you have new processors like dual core

ieee80211 drivers
Ralink USB rt2570
Ralink PCI rt2500
Ralink rt61, if you want load this, you must load with his launcher, you can find this in the menu of drivers
Ralink USB rt73
Atheros madwifi-hal
Intel pro wireless ipw2200
Realtek r8187
Intel pro wireless 3945, ipwraw old, If you want load ipwraw-old, also you have to load with his launcher

mac80211 drivers

Zydas zd1211rw-mac80211
Intel pro wireless iwlagn, wifiway has the newest firmware to iwl4965 and iwl5x00, It's the first LiveCD that includes these drivers natively
Intel pro wireless iwl3945, theese are been loaded default.
Broadcom b43 y b43legacy

Also, we have put more drivers in /opt/drivers. If you want use them, you must to load it

Ralink rtx200
Intel pro wireless ipw2x00
Atheros ath5k
Atheros ath9k

wifiway includes lot of wireless tools like:
Suite aircrack-ng
jazzteldecrypter
stkeys
wlandecrypter
dlinkdecrypter
rfidtool version 0.2
decsagem
wepattack
weplab
cowpatty
airoscript with some tools incorporated inside
wlaninject
wifizoo 1.3
wireshark
airpwn
hamster & ferret
wifi-radar
Kwifimanager
Wireless assisntat
wifiscanner
WPA-GUI:  Gui to connect with wpa-psk
rutilt

To have more information of wifiway you can ask in the forum or visit www.wifiway.org

[sliderem]

Hello,
I am trying to make aircrack-ng work on  my environment.
I have a Sony Vaio with a Intel 5100 wifi card that is capable of injection.
I am using LiveCD : wifiway 1.0 that has the patched driver for intel 5100.
I am flowing step-by-step the the tutorial "Simple WEP Crack" (http://www.aircrack-ng.org/doku.php?id=simple_wep_crack&DokuWiki=3890e0ce43ad8aa0ece6fa2da78bc743)/

My problem is that the "injection test" and the "fake authentication" are working perfectly but only on the first call.
After a couple of tests it seems that test AP is not accepting anymore my "requests".An because of this is not accepting enough good data  packets to start the aircrack-ng on that output.

Here you have my specific commands :

Steps :
--------- #airmon-ng stop mon0
----------#airmon-ng start wlan0 1
----------#iwconfig
wifiway ~ # iwconfig
lo        no wireless extensions.
eth0      no wireless extensions.
wmaster0  no wireless extensions.
wlan0     IEEE 802.11abgn  ESSID:""
          Mode:Managed  Frequency:2.412 GHz  Access Point: Not-Associated
          Tx-Power=15 dBm
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
mon0      IEEE 802.11abgn  Mode:Monitor  Frequency:2.412 GHz  Tx-Power=15 dBm
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0         
------------#aireplay-ng -9 -e tedy -a 00:23:08:07:XX:XX  mon0
wifiway ~ #  aireplay-ng -9 -e tedy -a 00:23:08:07:XX:XX  mon0
For information, no action required: Using gettimeofday() instead of /dev/rtc
22:31:40  Waiting for beacon frame (BSSID: 00:23:08:07:XX:XX) on channel 1
22:31:40  Trying broadcast probe requests...
22:31:40  Injection is working!
22:31:42  Found 1 AP

22:31:42  Trying directed probe requests...
22:31:42  00:23:08:07:XX:XX - channel: 1 - 'tedy'
22:31:48  Ping (min/avg/max): 11.998ms/145.061ms/199.979ms Power: 221.93
22:31:48  15/30:  50%
------------#airodump-ng -c 1 --bssid 00:23:08:07:XX:XX -w output mon0
 CH  1 ][ Elapsed: 1 hour 4 mins ][ 2009-12-20 23:42

 BSSID              PWR RXQ  Beacons    #Data, #/s  CH  MB   ENC  CIPHER AUTH ESSID

 00:23:08:07:XX:XX  221 100    30052    21146    3   1  54 . WEP  WEP    OPN  tedy

 BSSID              STATION            PWR   Rate   Lost  Packets  Probe

 00:23:08:07:XX:XX  00:15:00:YY:YY:YY  215  48-36      8     1608


------------# aireplay-ng -1 0 -e teddy -a 00:23:08:07:XX:XX -h 00:23:6C:YY:YY:YY mon0
wifiway ~ # aireplay-ng -1 0 -e teddy -a 00:23:08:07:XX:XX  -h 00:23:6C:YY:YY:YY mon0
The interface MAC (00:21:5D:B0:XX:XX) doesn't match the specified MAC (-h).
        ifconfig mon0 hw ether 00:23:6C:97:YY:YY
23:45:33  Waiting for beacon frame (BSSID: 00:23:08:07:YY:YY) on channel 1

23:45:34  Sending Authentication Request (Open System) [ACK]
23:45:34  Authentication successful
23:45:34  Sending Association Request [ACK]

23:45:39  Sending Authentication Request (Open System) [ACK]
23:45:39  Authentication successful
23:45:39  Sending Association Request [ACK]
23:45:39  Association successful :-) (AID: 1)

[darkAudax]

sliderem,

You could try a different distro with the latest compat-wireless drivers.

The Intel cards have always had problems.  Your best bet is to buy a well supported card that is known to work such as the Alfa.

d.

[berni69]

hi sliderem

srry but i was studing and i haven't time to spend in internet =S

wifiwat 1.0 haven't support to inject with ipw5100 if you want to 'play' with this wireless card you can install the lastest compat-wireless such darkAudax had posted in the other post,

[marv2k4]

berni69 good job thanks for this post! ther is only 1 problem after i want to load kde screen is going  back
1920*1080 well my friend have that problem to shall can if fix that with a cm?

[berni69]

how are you charging kde? try autox, or xconfig and then execute startx

[walkermore]

pretty much useful drivers... i got the one what i want....thanx