iwpriv and iwconfig output for all drivers

Aircrack-ng

Welcome, Guest. Please login or register.
February 09, 2010, 04:48:37 am

Wiki: www.aircrack-ng.org
Bug tracker + latest devel sources: http://trac.aircrack-ng.org

31095 Posts in 5430 Topics by 14833 Members
Latest Member: Salgawitiadia

The number of driver is growing quite fast and, in order to update airmon-ng, we'll need a list of all drivers iwpriv and iwconfig output (Can you also include the revision/version of the driver and/or kernel version). Before posting, check that the output doesn't already exists.

Here is the output of r8187 (original realtek driver):

Code:

iwconfig wlan1
wlan1 802.11b/g Mode:Monitor Channel=8 Bit Rate=11 Mb/s
Retry:on Fragment thr:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

iwpriv wlan1
wlan1 Available private ioctls :
badcrc (8BE0) : set 1 int & get 0
activescan (8BE1) : set 1 int & get 0
rawtx (8BE2) : set 1 int & get 0

Edit:

Nokia 770:

Code:

wlan0 Available private ioctls :
set_debug (8BE0) : set 1 int & get 0
wpa_scan (8BE2) : set 0 & get 0
gen_ie (8BE4) : set 256 byte & get 0
set_preamble (8BEC) : set 1 int & get 0
get_preamble (8BED) : set 0 & get 1 int
set_hibernate (8BEE) : set 1 int & get 0
set_backscan (8BF0) : set 1 int & get 0
set_bperiod (8BF2) : set 1 int & get 0
get_bperiod (8BF3) : set 0 & get 1 int

islsm (prismGT softmac):

Code:

eth1 Available private ioctls :
reset (8BE0) : set 0 & get 0
set_announcedpkt (8BEF) : set 200 byte & get 0

Another version of orinoco (the last iwpriv is different):

Code:

iwpriv eth1
eth1 Available private ioctls :
force_reset (8BE0) : set 0 & get 0
card_reset (8BE1) : set 0 & get 0
set_port3 (8BE2) : set 1 int & get 0
get_port3 (8BE3) : set 0 & get 1 int
set_preamble (8BE4) : set 1 int & get 0
get_preamble (8BE5) : set 0 & get 1 int
set_ibssport (8BE6) : set 1 int & get 0
get_ibssport (8BE7) : set 0 & get 1 int
get_recs (8BFF) : set 0 & get 0

We currently have:

r8187
hostap
ipw2100
ipw2200
ipw3945
bcm43xx
madwifi-ng 0.9.2
rt2500
rt2500-cvs
AspJ rt2570 driver
prism54
zd1201
zd1211
rt73 cvs
r8180-sa2400
acx100
acx111
nokia 770
rt61
at76c503a
orinoco
wrt54g (openwrt)
ndiswrapper
islsm

We are looking for:

hostap from 2.6.18 (patched):

Code:

# iwconfig wlan0
wlan0 IEEE 802.11b ESSID:"linksys"
Mode:Monitor Frequency:2.447 GHz Access Point: Not-Associated
Bit Rate:2 Mb/s Sensitivity=1/3
Retry min limit:8 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/70 Signal level=-73 dBm Noise level=-73 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:108580 Missed beacon:0

# iwpriv wlan0
wlan0 Available private ioctls :
monitor (8BE4) : set 1 int & get 0
readmif (8BE3) : set 1 byte & get 1 byte
writemif (8BE2) : set 2 byte & get 0
reset (8BE6) : set 1 int & get 0
inquire (8BE8) : set 1 int & get 0
set_rid_word (8BEE) : set 2 int & get 0
maccmd (8BF0) : set 1 int & get 0
wds_add (8BEA) : set 1 addr & get 0
wds_del (8BEC) : set 1 addr & get 0
addmac (8BF2) : set 1 addr & get 0
delmac (8BF4) : set 1 addr & get 0
kickmac (8BF6) : set 1 addr & get 0
prism2_param (8BE0) : set 2 int & get 0
getprism2_param (8BE1) : set 1 int & get 1 int
txratectrl (0002) : set 1 int & get 0
gettxratectrl (0002) : set 0 & get 1 int
beacon_int (0003) : set 1 int & get 0
getbeacon_int (0003) : set 0 & get 1 int
pseudo_ibss (0004) : set 1 int & get 0
getpseudo_ibss (0004) : set 0 & get 1 int
alc (0005) : set 1 int & get 0
getalc (0005) : set 0 & get 1 int
dump (0007) : set 1 int & get 0
getdump (0007) : set 0 & get 1 int
other_ap_policy (0008) : set 1 int & get 0
getother_ap_pol (0008) : set 0 & get 1 int
max_inactivity (0009) : set 1 int & get 0
getmax_inactivi (0009) : set 0 & get 1 int
bridge_packets (000A) : set 1 int & get 0
getbridge_packe (000A) : set 0 & get 1 int
dtim_period (000B) : set 1 int & get 0
getdtim_period (000B) : set 0 & get 1 int
nullfunc_ack (000C) : set 1 int & get 0
getnullfunc_ack (000C) : set 0 & get 1 int
max_wds (000D) : set 1 int & get 0
getmax_wds (000D) : set 0 & get 1 int
autom_ap_wds (000E) : set 1 int & get 0
getautom_ap_wds (000E) : set 0 & get 1 int
ap_auth_algs (000F) : set 1 int & get 0
getap_auth_algs (000F) : set 0 & get 1 int
allow_fcserr (0010) : set 1 int & get 0
getallow_fcserr (0010) : set 0 & get 1 int
host_encrypt (0011) : set 1 int & get 0
gethost_encrypt (0011) : set 0 & get 1 int
host_decrypt (0012) : set 1 int & get 0
gethost_decrypt (0012) : set 0 & get 1 int
host_roaming (0015) : set 1 int & get 0
gethost_roaming (0015) : set 0 & get 1 int
bcrx_sta_key (0016) : set 1 int & get 0
getbcrx_sta_key (0016) : set 0 & get 1 int
ieee_802_1x (0017) : set 1 int & get 0
getieee_802_1x (0017) : set 0 & get 1 int
antsel_tx (0018) : set 1 int & get 0
getantsel_tx (0018) : set 0 & get 1 int
antsel_rx (0019) : set 1 int & get 0
getantsel_rx (0019) : set 0 & get 1 int
monitor_type (001A) : set 1 int & get 0
getmonitor_type (001A) : set 0 & get 1 int
wds_type (001B) : set 1 int & get 0
getwds_type (001B) : set 0 & get 1 int
hostscan (001C) : set 1 int & get 0
gethostscan (001C) : set 0 & get 1 int
ap_scan (001D) : set 1 int & get 0
getap_scan (001D) : set 0 & get 1 int
enh_sec (001E) : set 1 int & get 0
getenh_sec (001E) : set 0 & get 1 int
basic_rates (0020) : set 1 int & get 0
getbasic_rates (0020) : set 0 & get 1 int
oper_rates (0021) : set 1 int & get 0
getoper_rates (0021) : set 0 & get 1 int
hostapd (0022) : set 1 int & get 0
gethostapd (0022) : set 0 & get 1 int
hostapd_sta (0023) : set 1 int & get 0
gethostapd_sta (0023) : set 0 & get 1 int
wpa (0024) : set 1 int & get 0
getwpa (0024) : set 0 & get 1 int
privacy_invoked (0025) : set 1 int & get 0
getprivacy_invo (0025) : set 0 & get 1 int
tkip_countermea (0026) : set 1 int & get 0
gettkip_counter (0026) : set 0 & get 1 int
drop_unencrypte (0027) : set 1 int & get 0
getdrop_unencry (0027) : set 0 & get 1 int
scan_channels (0028) : set 1 int & get 0
getscan_channel (0028) : set 0 & get 1 int

ipw2200 from 2.6.18 (unpatched)

Code:

# iwconfig eth2
eth2 radio off ESSID:"linksys"
Mode:Managed Channel:0 Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power=off Sensitivity=8/0
Retry limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

# iwpriv eth2
eth2 Available private ioctls :
set_power (8BE0) : set 1 int & get 0
get_power (8BE1) : set 0 & get 80 char
set_mode (8BE2) : set 1 int & get 0
get_mode (8BE3) : set 0 & get 80 char
set_preamble (8BE4) : set 1 int & get 0
get_preamble (8BE5) : set 0 & get 16 char
reset (8BE6) : set 0 int & get 0
sw_reset (8BE7) : set 0 int & get 0
monitor (8BE8) : set 2 int & get 0

ipw2100 (1.2.1-r1) / ipw2100-firmware (1.3)

Code:

ticapix # iwconfig eth1
eth1 IEEE 802.11b ESSID:"Cr@ns" Nickname:"ipw2100"
Mode:Managed Frequency:2.432 GHz Access Point: 00:14:BF:3C:98:79
Bit Rate=1 Mb/s Tx-Power:16 dBm
Retry min limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=82/100 Signal level=-76 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:12943 Missed beacon:0

ticapix #

Code:

ticapix # iwpriv eth1
eth1 Available private ioctls :
monitor (8BE0) : set 2 int & get 0
reset (8BE1) : set 0 int & get 0
set_power (8BE2) : set 1 int & get 0
get_power (8BE3) : set 0 & get 80 char
set_preamble (8BE4) : set 1 int & get 0
get_preamble (8BE5) : set 0 & get 16 char
set_crc_check (8BE6) : set 1 int & get 0
get_crc_check (8BE7) : set 0 & get 16 char
ticapix #

bcm4318, firmware wl_apsta.o
kernel : 2.6.17-10 (kubuntu)

Code:

iwconfig eth1
eth1 IEEE 802.11b/g ESSID:"WRT54G" Nickname:"Broadcom 4318"
Mode:Managed Frequency=2.442 GHz Access Point: 00:13:10:E6:18:72
Bit Rate=11 Mb/s Tx-Power=18 dBm
RTS thr:off Fragment thr:off
Link Quality=56/100 Signal level=-57 dBm Noise level=-72 dBm
Rx invalid nwid:0 Rx invalid crypt:698 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

Code:

iwpriv eth1
eth1 Available private ioctls :
set_interfmode (8BE0) : set 1 int & get 0
get_interfmode (8BE1) : set 0 & get 80 char
set_shortpreamb (8BE2) : set 1 int & get 0
get_shortpreamb (8BE3) : set 0 & get 80 char
set_swencrypt (8BE4) : set 1 int & get 0
get_swencrypt (8BE5) : set 0 & get 80 char
write_sprom (8BE6) : set 512 char & get 0
read_sprom (8BE7) : set 0 & get 512 char

Quote

Gentoo Kernel 2.6.19 IPW2200 1.20 FW 3.0

Quote

iwconfig eth1
eth1 IEEE 802.11g ESSID:"FHS-WLAN" Nickname:""
   Mode:Managed Frequency:2.437 GHz Access Point: 00:0F:34:55:07:91
   Bit Rate:24 Mb/s Tx-Power=20 dBm Sensitivity=8/0
   Retry limit:7 RTS thr:off Fragment thr:off
   Encryption key:off
   Power Management:off
   Link Quality=58/100 Signal level=-66 dBm Noise level=-88 dBm
   Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
   Tx excessive retries:6 Invalid misc:26 Missed beacon:25

iwpriv eth1
eth1 Available private ioctls :
   set_power (8BE0) : set 1 int & get 0
   get_power (8BE1) : set 0 & get 80 char
   set_mode (8BE2) : set 1 int & get 0
   get_mode (8BE3) : set 0 & get 80 char
   set_preamble (8BE4) : set 1 int & get 0
   get_preamble (8BE5) : set 0 & get 16 char
   reset (8BE6) : set 0 int & get 0
   sw_reset (8BE7) : set 0 int & get 0
   monitor (8BE8) : set 2 int & get 0

Gentoo Kernel 2.6.19 Proxim 8470-WD Madwifi-ng 0.9.2 svn

Quote

iwconfig ath0
ath0 IEEE 802.11b ESSID:"" Nickname:""
   Mode:Managed Channel:0 Access Point: Not-Associated
   Bit Rate:0 kb/s Tx-Power:0 dBm Sensitivity=0/3
   Retry:off RTS thr:off Fragment thr:off
   Encryption key:off
   Power Management:off
   Link Quality:0 Signal level:0 Noise level:0
   Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
   Tx excessive retries:0 Invalid misc:0 Missed beacon:0

iwpriv ath0
ath0 Available private ioctls :
   setoptie (8BEE) : set 256 byte & get 0
   getoptie (8BEF) : set 0 & get 256 byte
   setkey (8BF2) : set 60 byte & get 0
   delkey (8BF4) : set 7 byte & get 0
   setmlme (8BF0) : set 42 byte & get 0
   addmac (8BF6) : set 1 addr & get 0
   delmac (8BF8) : set 1 addr & get 0
   kickmac (8BFE) : set 1 addr & get 0
   wds_add (8BFA) : set 1 addr & get 0
   wds_del (8BFC) : set 1 addr & get 0
   setchanlist (8BE6) : set 32 byte & get 0
   getchanlist (8BE7) : set 0 & get 32 byte
   getchaninfo (8BED) : set 0 & get 2044 byte
   mode (8BE2) : set 6 char & get 0
   get_mode (8BE3) : set 0 & get 6 char
   setwmmparams (8BE4) : set 4 int & get 0
   getwmmparams (8BE5) : set 3 int & get 1 int
   cwmin (0001) : set 3 int & get 0
   get_cwmin (0001) : set 2 int & get 1 int
   cwmax (0002) : set 3 int & get 0
   get_cwmax (0002) : set 2 int & get 1 int
   aifs (0003) : set 3 int & get 0
   get_aifs (0003) : set 2 int & get 1 int
   txoplimit (0004) : set 3 int & get 0
   get_txoplimit (0004) : set 2 int & get 1 int
   acm (0005) : set 3 int & get 0
   get_acm (0005) : set 2 int & get 1 int
   noackpolicy (0006) : set 3 int & get 0
   get_noackpolicy (0006) : set 2 int & get 1 int
   setparam (8BE0) : set 2 int & get 0
   getparam (8BE1) : set 1 int & get 1 int
   authmode (0003) : set 1 int & get 0
   get_authmode (0003) : set 0 & get 1 int
   protmode (0004) : set 1 int & get 0
   get_protmode (0004) : set 0 & get 1 int
   mcastcipher (0005) : set 1 int & get 0
   get_mcastcipher (0005) : set 0 & get 1 int
   mcastkeylen (0006) : set 1 int & get 0
   get_mcastkeylen (0006) : set 0 & get 1 int
   ucastciphers (0007) : set 1 int & get 0
   get_uciphers (0007) : set 0 & get 1 int
   ucastcipher (0008) : set 1 int & get 0
   get_ucastcipher (0008) : set 0 & get 1 int
   ucastkeylen (0009) : set 1 int & get 0
   get_ucastkeylen (0009) : set 0 & get 1 int
   keymgtalgs (0015) : set 1 int & get 0
   get_keymgtalgs (0015) : set 0 & get 1 int
   rsncaps (0016) : set 1 int & get 0
   get_rsncaps (0016) : set 0 & get 1 int
   hostroaming (000C) : set 1 int & get 0
   get_hostroaming (000C) : set 0 & get 1 int
   privacy (000D) : set 1 int & get 0
   get_privacy (000D) : set 0 & get 1 int
   countermeasures (000E) : set 1 int & get 0
   get_countermeas (000E) : set 0 & get 1 int
   dropunencrypted (000F) : set 1 int & get 0
   get_dropunencry (000F) : set 0 & get 1 int
   wpa (000A) : set 1 int & get 0
   get_wpa (000A) : set 0 & get 1 int
   driver_caps (0010) : set 1 int & get 0
   get_driver_caps (0010) : set 0 & get 1 int
   maccmd (0011) : set 1 int & get 0
   wmm (0012) : set 1 int & get 0
   get_wmm (0012) : set 0 & get 1 int
   hide_ssid (0013) : set 1 int & get 0
   get_hide_ssid (0013) : set 0 & get 1 int
   ap_bridge (0014) : set 1 int & get 0
   get_ap_bridge (0014) : set 0 & get 1 int
   inact (0017) : set 1 int & get 0
   get_inact (0017) : set 0 & get 1 int
   inact_auth (0018) : set 1 int & get 0
   get_inact_auth (0018) : set 0 & get 1 int
   inact_init (0019) : set 1 int & get 0
   get_inact_init (0019) : set 0 & get 1 int
   abolt (001A) : set 1 int & get 0
   get_abolt (001A) : set 0 & get 1 int
   dtim_period (001C) : set 1 int & get 0
   get_dtim_period (001C) : set 0 & get 1 int
   bintval (001D) : set 1 int & get 0
   get_bintval (001D) : set 0 & get 1 int
   doth (001E) : set 1 int & get 0
   get_doth (001E) : set 0 & get 1 int
   doth_pwrtgt (001F) : set 1 int & get 0
   get_doth_pwrtgt (001F) : set 0 & get 1 int
   doth_reassoc (0020) : set 1 int & get 0
   compression (0021) : set 1 int & get 0
   get_compression (0021) : set 0 & get 1 int
   ff (0022) : set 1 int & get 0
   get_ff (0022) : set 0 & get 1 int
   turbo (0001) : set 1 int & get 0
   get_turbo (0001) : set 0 & get 1 int
   xr (0023) : set 1 int & get 0
   get_xr (0023) : set 0 & get 1 int
   burst (0024) : set 1 int & get 0
   get_burst (0024) : set 0 & get 1 int
   doth_chanswitch (8BE8) : set 2 int & get 0
   pureg (0025) : set 1 int & get 0
   get_pureg (0025) : set 0 & get 1 int
   ar (0026) : set 1 int & get 0
   get_ar (0026) : set 0 & get 1 int
   wds (0027) : set 1 int & get 0
   get_wds (0027) : set 0 & get 1 int
   bgscan (0028) : set 1 int & get 0
   get_bgscan (0028) : set 0 & get 1 int
   bgscanidle (0029) : set 1 int & get 0
   get_bgscanidle (0029) : set 0 & get 1 int
   bgscanintvl (002A) : set 1 int & get 0
   get_bgscanintvl (002A) : set 0 & get 1 int
   mcast_rate (002B) : set 1 int & get 0
   get_mcast_rate (002B) : set 0 & get 1 int
   coverageclass (002C) : set 1 int & get 0
   get_coveragecls (002C) : set 0 & get 1 int
   countryie (002D) : set 1 int & get 0
   get_countryie (002D) : set 0 & get 1 int
   scanvalid (002E) : set 1 int & get 0
   get_scanvalid (002E) : set 0 & get 1 int
   regclass (003B) : set 1 int & get 0
   get_regclass (003B) : set 0 & get 1 int
   dropunenceapol (003C) : set 1 int & get 0
   get_dropunencea (003C) : set 0 & get 1 int
   rssi11a (002F) : set 1 int & get 0
   get_rssi11a (002F) : set 0 & get 1 int
   rssi11b (0030) : set 1 int & get 0
   get_rssi11b (0030) : set 0 & get 1 int
   rssi11g (0031) : set 1 int & get 0
   get_rssi11g (0031) : set 0 & get 1 int
   rate11a (0032) : set 1 int & get 0
   get_rate11a (0032) : set 0 & get 1 int
   rate11b (0033) : set 1 int & get 0
   get_rate11b (0033) : set 0 & get 1 int
   rate11g (0034) : set 1 int & get 0
   get_rate11g (0034) : set 0 & get 1 int
   uapsd (0035) : set 1 int & get 0
   get_uapsd (0035) : set 0 & get 1 int
   sleep (0036) : set 1 int & get 0
   get_sleep (0036) : set 0 & get 1 int
   qosnull (0037) : set 1 int & get 0
   pspoll (0038) : set 1 int & get 0
   eospdrop (0039) : set 1 int & get 0
   get_eospdrop (0039) : set 0 & get 1 int
   markdfs (003A) : set 1 int & get 0
   get_markdfs (003A) : set 0 & get 1 int
   setiebuf (8BEA) : set 1024 byte & get 0
   getiebuf (8BE9) : set 0 & get 1024 byte
   setfilter (8BEC) : set 4 byte & get 0

Ubuntu 2.6.15-27-686, rt2500-cvs-2006122101

Code:

iwconfig ra0
ra0 RT2500 Wireless ESSID:"StarkStrom"
Mode:Monitor Frequency=2.437 GHz Bit Rate:11 Mb/s Tx-Power:0 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=0/100 Signal level=-66 dBm Noise level:-192 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

iwpriv ra0
ra0 Available private ioctls :
set (8BE2) : set 1024 char & get 0
bbp (8BE3) : set 1024 char & get 1024 char
mac (8BE5) : set 1024 char & get 1024 char
e2p (8BE7) : set 1024 char & get 1024 char
rfmontx (8BED) : set 2 int & get 1 char

Hope it helps

Kubuntu edgy

ipw2200

iwconfig eth1
eth1 unassociated ESSID:off/any
Mode:Managed Channel=0 Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power=20 dBm Sensitivity=8/0
Retry limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

iwpriv eth1
eth1 Available private ioctls :
set_power (8BE0) : set 1 int & get 0
get_power (8BE1) : set 0 & get 80 char
set_mode (8BE2) : set 1 int & get 0
get_mode (8BE3) : set 0 & get 80 char
set_preamble (8BE4) : set 1 int & get 0
get_preamble (8BE5) : set 0 & get 16 char
reset (8BE6) : set 0 int & get 0
sw_reset (8BE7) : set 0 int & get 0
monitor (8BE8) : set 2 int & get 0

prism54
iwconfig eth2
eth2 NOT READY! ESSID:off/any
Mode:Managed Channel:0 Access Point: Not-Associated
Tx-Power=31 dBm Sensitivity=0/200
Retry min limit:0 RTS thr=0 B Fragment thr=0 B
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
iwpriv eth2

eth2 Available private ioctls :
reset (8BE0) : set 0 & get 0
get_prismhdr (8BF7) : set 0 & get 1 int
set_prismhdr (8BF8) : set 1 int & get 0
getPolicy (8BE1) : set 0 & get 1 int
setPolicy (8BE2) : set 1 int & get 0
getMac (8BE3) : set 0 & get 64 addr
addMac (8BE4) : set 1 addr & get 0
delMac (8BE6) : set 1 addr & get 0
kickMac (8BE8) : set 1 addr & get 0
kickAll (8BEA) : set 0 & get 0
get_wpa (8BEB) : set 0 & get 1 int
set_wpa (8BEC) : set 1 int & get 0
dbg_oid (8BEE) : set 1 int & get 0
dbg_get_oid (8BEF) : set 0 & get 256 byte
dbg_set_oid (8BF0) : set 256 byte & get 0
s_addr (0000) : set 1 addr & get 0
g_addr (0000) : set 0 & get 1024 char
g_linkstate (0001) : set 0 & get 1024 char
s_bsstype (0006) : set 1 int & get 0
g_bsstype (0006) : set 0 & get 1024 char
s_bssid (0007) : set 1 addr & get 0
g_bssid (0007) : set 0 & get 1024 char
s_state (0009) : set 1 int & get 0
g_state (0009) : set 0 & get 1024 char
s_aid (000A) : set 1 int & get 0
g_aid (000A) : set 0 & get 1024 char
s_ssidoverride (000C) : set 1 char & get 0
g_ssidoverride (000C) : set 0 & get 1024 char
s_medlimit (000D) : set 1 int & get 0
g_medlimit (000D) : set 0 & get 1024 char
s_beacon (000E) : set 1 int & get 0
g_beacon (000E) : set 0 & get 1024 char
s_dtimperiod (000F) : set 1 int & get 0
g_dtimperiod (000F) : set 0 & get 1024 char
s_authenable (0014) : set 1 int & get 0
g_authenable (0014) : set 0 & get 1024 char
s_privinvok (0015) : set 1 int & get 0
g_privinvok (0015) : set 0 & get 1024 char
s_exunencrypt (0016) : set 1 int & get 0
g_exunencrypt (0016) : set 0 & get 1024 char
s_rekeythresh (001A) : set 1 int & get 0
g_rekeythresh (001A) : set 0 & get 1024 char
s_maxtxlife (0024) : set 1 int & get 0
g_maxtxlife (0024) : set 0 & get 1024 char
s_maxrxlife (0025) : set 1 int & get 0
g_maxrxlife (0025) : set 0 & get 1024 char
s_fixedrate (002C) : set 1 int & get 0
g_fixedrate (002C) : set 0 & get 1024 char
s_frameburst (0030) : set 1 int & get 0
g_frameburst (0030) : set 0 & get 1024 char
s_psm (0031) : set 1 int & get 0
g_psm (0031) : set 0 & get 1024 char
s_bridge (0035) : set 1 int & get 0
g_bridge (0035) : set 0 & get 1024 char
s_clients (0036) : set 1 int & get 0
g_clients (0036) : set 0 & get 1024 char
s_clientassoc (0037) : set 1 int & get 0
g_clientassoc (0037) : set 0 & get 1024 char
s_dot1xenable (003E) : set 1 int & get 0
g_dot1xenable (003E) : set 0 & get 1024 char
s_rxant (0052) : set 1 int & get 0
g_rxant (0052) : set 0 & get 1024 char
s_txant (0053) : set 1 int & get 0
g_txant (0053) : set 0 & get 1024 char
s_antdivers (0054) : set 1 int & get 0
g_antdivers (0054) : set 0 & get 1024 char
s_edthresh (0056) : set 1 int & get 0
g_edthresh (0056) : set 0 & get 1024 char
s_preamble (0057) : set 1 int & get 0
g_preamble (0057) : set 0 & get 1024 char
g_rates (0058) : set 0 & get 1024 char
s_.11outpower (005D) : set 1 int & get 0
g_.11outpower (005D) : set 0 & get 1024 char
g_supprates (005E) : set 0 & get 1024 char
g_suppfreq (0060) : set 0 & get 1024 char
s_noisefloor (0061) : set 1 int & get 0
g_noisefloor (0061) : set 0 & get 1024 char
g_freqactivity (0062) : set 0 & get 1024 char
s_nonerpprotec (0064) : set 1 int & get 0
g_nonerpprotec (0064) : set 0 & get 1024 char
s_profile (0067) : set 1 int & get 0
g_profile (0067) : set 0 & get 1024 char
g_extrates (0068) : set 0 & get 1024 char
s_mlmelevel (0078) : set 1 int & get 0
g_mlmelevel (0078) : set 0 & get 1024 char
g_bsss (007C) : set 0 & get 1024 char
g_bsslist (007F) : set 0 & get 1024 char
s_mode (0083) : set 1 int & get 0
g_mode (0083) : set 0 & get 1024 char
s_config (0088) : set 1 int & get 0
g_config (0088) : set 0 & get 1024 char
s_.11dconform (0089) : set 1 int & get 0
g_.11dconform (0089) : set 0 & get 1024 char
g_phycapa (008A) : set 0 & get 1024 char
s_outpower (008B) : set 1 int & get 0
g_outpower (008B) : set 0 & get 1024 char

ipw3945 2.6.19.1

wlan0 unassociated ESSID:off/any
Mode:Monitor Frequency=5.3 GHz Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power:16 dBm
Retry limit:15 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:73112 Missed beacon:0

wlan0 Available private ioctls :
set_power (8BE0) : set 1 int & get 0
get_power (8BE1) : set 0 & get 80 char
set_mode (8BE2) : set 1 int & get 0
get_mode (8BE3) : set 0 & get 80 char
set_preamble (8BE4) : set 1 int & get 0
get_preamble (8BE5) : set 0 & get 16 char
reset (8BE7) : set 0 int & get 0
monitor (8BE6) : set 2 int & get 0

Code:

iwpriv rausb0
rausb0 Available private ioctls :
auth (8BE0) : set 1 int & get 0
enc (8BE1) : set 1 int & get 0
wpapsk (8BE2) : set 64 char & get 0
psm (8BE3) : set 1 int & get 0
adhocmode (8BE4) : set 1 int & get 0
rfmontx (8BE5) : set 1 int & get 1 char
rfprismhdr (8BE6) : set 1 int & get 1 char

Code:

iwconfig rausb0
rausb0 RT2500USB WLAN ESSID:""
Mode:Monitor Frequency=2.462 GHz Bit Rate=11 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=0/100 Signal level:-120 dBm Noise level:-199 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

Is this sufficient ?

ASPj's 1.4.9 driver installed with WUSB54G v4

ZyDAS zd1211, kernel 2.6.18, firmware 1.2, Gentoo Linux.

Quote

iwconfig eth1
eth1 802.11g zd1211 ESSID:off/any
Mode:Monitor Frequency=2.412 GHz Access Point: Invalid
Bit Rate=1 Mb/s
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

iwpriv eth1
eth1 Available private ioctls :
set_regdomain (8BE0) : set 1 byte & get 0
get_regdomain (8BE1) : set 0 & get 1 byte

# iwconfig rausb0[img][/img]
rausb0 RT73 WLAN ESSID:"My essid" Nickname:""
Mode:Managed Frequency=2.437 GHz Access Point: 00:ab:cd:12:34:56
Bit Rate=1 Mb/s
RTS thr:off Fragment thr:off
Encryption key:1234567890
Link Quality=59/100 Signal level:-80 dBm Noise level:-115 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

# iwpriv rausb0
rausb0 Available private ioctls :
set (8BE2) : set 1024 char & get 0
bbp (8BE3) : set 1024 char & get 1024 char
mac (8BE5) : set 1024 char & get 1024 char
adhocOfdm (8BE6) : set 1 int & get 0
stat (8BE9) : set 1024 char & get 1024 char
get_site_survey (8BED) : set 1024 char & get 1024 char
get_RaAP_Cfg (8BEF) : set 1024 char & get 0
forceprism (8BF0) : set 1024 char & get 0
rfmontx (8BEC) : set 1024 char & get 1 char
auth (8BE7) : set 1 int & get 0
enc (8BE8) : set 1 int & get 0
wpapsk (8BEA) : set 64 char & get 0
psm (8BEB) : set 1 int & get 0

just in case:
# iwconfig --version
iwconfig Wireless-Tools version 29
Compatible with Wireless Extension v11 to v21.

Kernel Currently compiled with Wireless Extension v21.

rausb0 Recommend Wireless Extension v14 or later,
Currently compiled with Wireless Extension v21.
2.6.20-rc1 kernel

Atheros WG511T

Code:

# iwconfig ath0
ath0 IEEE 802.11g ESSID:"linksys"
Mode:Managed Frequency:2.462 GHz Access Point: xxxxxxxxxxxxxxx
Bit Rate:36 Mb/s Tx-Power:18 dBm Sensitivity=0/3
Retry:off RTS thr:off Fragment thr:off
Encryption key:xxxxxxxxxxxxx Security mode:restricted
Power Management:off
Link Quality=46/94 Signal level=-49 dBm Noise level=-95 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

Code:

# iwpriv ath0
ath0 Available private ioctl :
setoptie (8BE8) : set 256 byte & get 0
getoptie (8BE9) : set 0 & get 256 byte
setkey (8BE2) : set 60 byte & get 0
delkey (8BE4) : set 7 byte & get 0
setmlme (8BE6) : set 42 byte & get 0
addmac (8BEA) : set 1 addr & get 0
delmac (8BEC) : set 1 addr & get 0
chanlist (8BEE) : set 32 byte & get 0
wdsadd (8BF0) : set 1 addr & get 0
wdsdel (8BF2) : set 1 addr & get 0
setparam (8BE0) : set 2 int & get 0
getparam (8BE1) : set 1 int & get 1 int
turbo (0001) : set 1 int & get 0
get_turbo (0001) : set 0 & get 1 int
mode (0002) : set 1 int & get 0
get_mode (0002) : set 0 & get 1 int
authmode (0003) : set 1 int & get 0
get_authmode (0003) : set 0 & get 1 int
protmode (0004) : set 1 int & get 0
get_protmode (0004) : set 0 & get 1 int
mcastcipher (0005) : set 1 int & get 0
get_mcastcipher (0005) : set 0 & get 1 int
mcastkeylen (0006) : set 1 int & get 0
get_mcastkeylen (0006) : set 0 & get 1 int
ucastciphers (0007) : set 1 int & get 0
get_uciphers (0007) : set 0 & get 1 int
ucastcipher (0008) : set 1 int & get 0
get_ucastcipher (0008) : set 0 & get 1 int
ucastkeylen (0009) : set 1 int & get 0
get_ucastkeylen (0009) : set 0 & get 1 int
keymgtalgs (0015) : set 1 int & get 0
get_keymgtalgs (0015) : set 0 & get 1 int
rsncaps (0016) : set 1 int & get 0
get_rsncaps (0016) : set 0 & get 1 int
roaming (000C) : set 1 int & get 0
get_roaming (000C) : set 0 & get 1 int
privacy (000D) : set 1 int & get 0
get_privacy (000D) : set 0 & get 1 int
countermeasures (000E) : set 1 int & get 0
get_countermeas (000E) : set 0 & get 1 int
dropunencrypted (000F) : set 1 int & get 0
get_dropunencry (000F) : set 0 & get 1 int
wpa (000A) : set 1 int & get 0
get_wpa (000A) : set 0 & get 1 int
driver_caps (0010) : set 1 int & get 0
get_driver_caps (0010) : set 0 & get 1 int
maccmd (0011) : set 1 int & get 0
wme (0012) : set 1 int & get 0
get_wme (0012) : set 0 & get 1 int
hide_ssid (0013) : set 1 int & get 0
get_hide_ssid (0013) : set 0 & get 1 int
ap_bridge (0014) : set 1 int & get 0
get_ap_bridge (0014) : set 0 & get 1 int
inact (0017) : set 1 int & get 0
get_inact (0017) : set 0 & get 1 int
inact_auth (0018) : set 1 int & get 0
get_inact_auth (0018) : set 0 & get 1 int
inact_init (0019) : set 1 int & get 0
get_inact_init (0019) : set 0 & get 1 int
ibss (001A) : set 1 int & get 0
get_ibss (001A) : set 0 & get 1 int
pureg (001B) : set 1 int & get 0
get_pureg (001B) : set 0 & get 1 int
wdsonly (001C) : set 1 int & get 0
get_wdsonly (001C) : set 0 & get 1 int
reset (0063) : set 1 int & get 0

bcm43xx_d80211

Code:

iwconfig wlan0
wlan0 IEEE 802.11g Mode:Monitor Frequency:2.412 GHz
RTS thr:off Fragment thr=2346 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

iwpriv wlan0
wlan0 Available private ioctls :
param (8BE0) : set 2 int & get 0
get_param (8BE1) : set 1 int & get 1 int
test_param (8BE4) : set 2 int & get 0

uname -a
Linux 2.6.15-27-386, rt2500

iwconfig ra0
ra0 RT2500 Wireless ESSID:"PAA19"
Mode:Managed Frequency=2.412 GHz Bit Rate:11 Mb/s Tx-Power:0 dBm
RTS thr:off Fragment thr:off
Link Quality=0/100 Signal level=-120 dBm Noise level:-200 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

iwpriv ra0
ra0 Available private ioctls :
set (8BE2) : set 1024 char & get 0
bbp (8BE3) : set 1024 char & get 1024 char
mac (8BE5) : set 1024 char & get 1024 char
e2p (8BE7) : set 1024 char & get 1024 char
rfmontx (8BED) : set 2 int & get 1 char

r8180

Code:

# uname -a
Linux 2.6.17-gentoo-r8 #4 SMP PREEMPT Wed Dec 20 22:14:18 CET 2006 i686 Mobile AMD Athlon(tm) XP 3000+ AuthenticAMD GNU/Linux
# iwconfig wlan0
wlan0 IEEE 802.11b ESSID:"belkin54g"
Mode:Managed Frequency:2.462 GHz Access Point: 00:17:3F:0D:A3:5A
Bit Rate=11 Mb/s Sensitivity=80/85
Retry:on Fragment thr:off
Encryption key:off
Link Quality=84/100 Signal level=-63 dBm Noise level=-240 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

# iwpriv wlan0
wlan0 Available private ioctls :
monitor (8BE0) : set 2 int & get 0
badcrc (8BE1) : set 1 int & get 0
forceassoc (8BE2) : set 1 int & get 0
beaconint (8BE3) : set 1 int & get 0
prismhdr (8BE4) : set 1 int & get 0
activescan (8BE5) : set 1 int & get 0